Lenovo Vibe P1m Stock Firmware

Lenovo Vibe P1m users if you’ve downloaded and installed any custom ROM but now if you want to revert back to the default version which came out of the box then this ROM is the correct one. All you have to do is, follow the instructions below and install the Lenovo Vibe P1m Stick Firmware

DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. techolite and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.

Pre-Requisites

  • SP Flash Tool 5.1532 – Download it from here
  • Rooted Device – Follow this guide
  • Lenovo Vibe P1m Stock Firmware – Download it from here

About The ROM

Android Version: 5.1

ROM Version : S025_150924

Type: VIBE UI

Author/Credits: Lenovo Forums

Features

  • All stock features
  • 64 Bit

How to Install Stock ROM on Lenovo Vibe P1m

  1. Download and extract SP Flash Tools and the custom ROM on your PC/Laptop
  2. Now on your Vibe P1m go to Settings > About Phone >Click Build Number several times till you get the message “Developer options enabled”
  3. Again on your device go to Settings >Developer Options and enable USB Debugging
  4. Now run flash_tool.exe from SP Flash Tools folder and select the MT6735M_Android_scatter.txt file from the Stock ROM folder
  5. Now click the Download button and then connect your Vibe P1m using USB to your PC/Laptop
  6. Once done, reboot your device.

Lenovo Vibe P1m Stock Firmware

Bugs

  • None
You might also like
13 Comments
  1. white hat says

    I want to flash through TWRP help me ASAP

  2. Dhiraj says

    Anybody send me AP DP for vibe p1m

  3. saurab_007 says

    https://cloud.mail.ru/public/4nKm/GLh1CVpTa

    latest stock rom version S036

  4. Priteshkapadia31280 says

    After install stock ROM my sim tower gone how to reinstall sim tower

  5. akash says

    please upload rom for lenovo p1ma40.

  6. saurab_007 says

    hey developer ,
    can you please upload the latest stock rom P1ma40_s029
    OR
    p1ma40_s036??

  7. karthic says

    HI TEAM,

    HOW CAN I ENABLE DEVELOPER SETTINS, ON BRICKED PHONE??

    PLS HLP

  8. soji says

    I can’t conection to pc!
    Error “USB Device Not Recognized”
    We can help me!

  9. Frank Co says

    Does this also work for p1ma40? Thanks

  10. Frank Co says

    Is p1ma40 the same with p1m?

  11. Musis says

    just untick Preloader and Uboot/Lk files, then choose download….if you need to flash.
    But if your HH has hard-brick already, try flashing in Meta-mode(hold together vol up+down)….
    or use wire-trick make a short connection beetwen KCOLO (Test-point on machine board) with Ground…then flash with
    the proper file flash…. sorry for my english

  12. Toyesh Patra says

    can you plz provide the nvram.bin or bplguinfocustom file for vibe p1m. i need the file for imei change as i formatted my nvram.

  13. Toyesh Patra says

    can you plz provide the nvram.bin or bplguinfocustom file for vibe p1m. i need the file for imei change as i formatted my nvram.

  14. G.Hangari says

    My phone is not booting, even flash tool not detecting the device, all drivers are installed properly. what should I do?

  15. G.Hangari says

    My phone is not booting, even flash tool not detecting the device, all drivers are installed properly. what should I do?

Leave A Reply

Your email address will not be published.