Lenovo K3 Note Vibe UI 3.5 Custom Rom

Once again another custom rom based on Marshmallow 6.0 for Lenovo K3 Note which is demanded by many users and is almost as the stock but with modifications and tweaks which makes it more suitable for the daily and heavy users. Lenovo K3 Note Vibe UI 3.5 custom rom is based on androids marshmallow 6.0 operating system which is running on 64 bit cpu architecture. The Vibe UI 3.5 custom rom is pre-rooted which mean you do not have to root it or go through much exercise for it.

Download Lenovo K3 Note Vibe UI 3.5 Custom Rom

DISCLAIMER : Please be advised that Techolite or its authors are not liable at any cost if you brick your device or the data is lost, it is suggested that you take a back up of your current rom and data. Installing/Flashing/Rooting custom roms & custom recoveries are risky, you’re sole responsible for everything.

About the Rom

Type : VIBE UI 3.5

Version : V2 -1605

Author : Cuoco92

OS : Marshmallow 6.0

Size : 960 MB

Pre-Requisites

  1. Custom Recovery – TWRP if you are on Lollipop or Marshmallow
  2. FirmwareLenovo K3 Note Vibe UI 3.5 Custom Rom
  3. Take entire backup of your personal data and contacts
  4. Keep your Lenovo K3 Note battery charged above 70 %

Features of the Rom

  • Pre-Rooted (SuperSu inbuilt)
  • Gapps Pre-installed
  • FM Radio
  • Multilanguage
  • Busybox In-Built
  • Performance & Battery Tweaked
  • Xposed Framework,  Gravitybox
  • Settings

  • Support for external memory card will be converted into the built-in memory
  • Support for storage devices more management operations
  • Advanced WLAN settings increase inlet directly connected to WLAN
  • “Location Services”, the location information is determined using Bluetooth mode Added support position
  • USB connection increases “MIDI option”
  • “Backup and Reset” to be reset network settings can reset the WLAN, mobile data networks and Bluetooth settings
  • Optimization: In Android M, based on the optimization of “You Are the One mode” feature
  • Optimization: connect but can not access the network will be displayed below the AP was unable to access the Internet tips
  • Optimization: After turn on the Bluetooth switch, the device can be detected

    Power management

  • Added “backstage power” function can optimize the application to extend battery life
  • Optimization: intelligent power-saving time switch function delete

    Contacts

  • “Call settings,” added press the power button to end the call switch

    Security center

  • Optimization: harassment interception adjustment as “anti-harassment”, while adding Dropzone management and notification management function
  • Optimization: Adjustment “Application Management” permission entry
  • Optimization: Delete “rights management” function

    Clock

  • Optimization: When setting the alarm time is under 12-hour format, support AM / PM identification reminder

    System Upgrade

  • Optimization: Home interface UI adjustment

    Notification Center

  • Optimization: screenshots notification bar message delete button after the increase, support to quickly remove just grab screenshots
  • Optimization: Application Notification Manager to join if you’re Mode setting
  • Optimization: quick switch support click Eject Options panel
  • Optimization: Andrews native dimming control bar
  • Optimization: GPS switch to adjust for the location service switch

How to Install VIBE UI 3.5 On Lenovo K3 Note?

Step 1 : Copy the Lenovo-k3-note-vibe-ui-3.5-techolite.com zip file downloaded to your SD Card

Step 2 : Now go to TWRP recovery menu

Step 3 : Perform advance wipe & select system, data, dalvik cache, cache.

Step 4 : Go back and click Install and select the rom and flash

Step 5 : Reboot (This might take 3-5 minutes)

Screenshots

vibe ui 3.5 vibe ui 3.5 lenovo k3 note vibe ui 3.5 custom rom

You might also like
2 Comments
  1. Ahmad Saalim Lone says

    Link Broken. Please update the link

  2. shreeyansh says

    Plz port this rom for lenovo a6000 plus also.🙏

Leave A Reply

Your email address will not be published.